How To Put On Sony Xperia J CWM ICS and JB

Step execution

1. Install Flashtool who have downloaded earlier, Install also Flashtool-drivers are located in the Local disk C / Flashtool / Drivers / Here

2. Extract CWM XJ (pass: an21droid.blogspot.com), Put in Local disk C / Flashtool / Fimwares / Here

3. Extract Kernel JB / ICS (according to FW agan), Put in Local disk C / Flashtool / Fimwares / Here ma
4. Turn off the XJ agan, Log into fastboot mode by pressing the volume up button and connect the XJ to a laptop with a USB cable (blue LED lit signs already made it into fastboot mode).

5. Open Flashtool, click the symbol of lightning like the picture



6. Select the fastboot mode as in the picture, click OK

7. Select select the kernel to flash like in the picture



8. Select fimwares / cwm-xj, then click Open, View pictures


9. If successful there will be pemeritahuan 'OKAY' in his flashtool window


10. Unplug the XJ from the USB cable, turn the XJ, purple LED When lit press the volume up over and over - and over until its entry into CWM, please do activities that agan need, When finished, remove the battery XJ, Wait a moment, Replace, Repeat to 4 s / d 8, in step 8 to select Kernel.sin JB / ICS (according to FW), do not select CWM-XJ, click 'open' wait until the notice 'OKAY' XJ disconnect from the USB, turn ... ENJOYY ...;)
Not: I will not be responsible in case of what - what with HH agan, DWIYOR !!

Tweet

Jangan sampai ketinggalan postingan-postingan terbaik dari Raffa Software. Berlangganan melalui email sekarang juga:

Atau sobat juga bisa follow Raffa Software dengan mengklik tombol di bawah ini:

Artikel keren lainnya:

Ditulis oleh Romeo Diaz Satsat pada tanggal Selasa, 06 Oktober 2015